Submit a Repair Request

Toilet Clogs

If your toilet clogs, the first step is to remain calm and not flush it again, as it may cause further damage.

Grab a plunger and gently insert it into the toilet bowl, covering the drain hole. Use a firm but controlled motion to push and pull the plunger, creating suction to dislodge the clog. If the water level is too high, use a bucket or towel to remove excess water before plunging.

Sink / Shower Clogs

If your sink or shower clogs, there are a few steps you can take to address the issue. First, remove any visible debris from the drain using gloves or a tool like pliers. Next, try using a plunger specifically designed for sinks or showers to create suction and dislodge the clog.

If that doesn't work, you can use a chemical drain cleaner, following the instructions carefully and taking proper safety precautions.

If these DIY methods don't work, get in touch with us.

Losing electrical power in your home can be inconvenient, but there are several steps you can take to address the situation.

First, check if the power outage is limited to your home or if it's a widespread issue in your area. If it's just your home, check the circuit breaker or fuse box to see if any breakers have tripped or fuses have blown. Resetting the breaker or replacing the fuse may restore power.

If that doesn't work, try unplugging all non-essential electrical devices and then resetting the breaker.

If the outage persists, contact your electricity provider to report the issue.

First, check the thermostat on your water heater to make sure it's set at the appropriate temperature. If it's set correctly and you're still not getting hot water, check the circuit breaker or fuse box to see if the water heater's breaker has tripped or a fuse has blown. Resetting the breaker or replacing the fuse may restore hot water.

If that doesn't work, check the pilot light on gas water heaters to make sure it's lit. If the pilot light is out, follow the manufacturer's instructions to relight it safely.

If your HVAC system isn't working, there are several steps you can take to troubleshoot the issue.

First, check the thermostat to make sure it's set to the desired temperature and the display is working. Next, check the circuit breaker or fuse box to see if the HVAC system's breaker has tripped or a fuse has blown.

Resetting the breaker or replacing the fuse may restore power. If that doesn't work, check the air filter to make sure it's clean and not clogged. A dirty filter can restrict airflow and cause HVAC system issues.

In the event of a true emergency, call 911 for help.

For maintenance emergencies, call our office: 562-375-4101